Mode (GDS will ring each extension by default 15 seconds, this can be changed on the Ring Timeout) or ring them
simultaneously in Parallel Hunting Mode.
○
When using UCM, users can also configure there a Ring Group extension (6400 for example) that will ring multiple
extensions simultaneously, or one by one depending on the Ring Group ring strategy.
○
If all phones are GXP21XX, the phone will stream the video frame by frame and users can open door either by
pressing Remote_PIN# or by pressing Open Door button if already configured.
○
If early medial is enabled on phone side, user can send the PIN code using the Open-Door button before answering the
call (Of course users can open the door also after answering the call).
●
Peering mode:
○
User should configure multiple IP addresses of phones instead of SIP extensions, when Door Bell pressed the GDS3710
will ring the configured IP Addresses in Serial or Parallel Mode according to Doorbell Call Mode strategy.
○
If early media is enabled, the GXV33XX will receive the video stream while it is ringing, and user can open door by
pressing the Open-Door button if already configured (Of course users can open the door also after answering the call).
○
GXP21XX phones receive the GDS3710 video using JPEG streaming this means that it will receive video if early media
is enabled or disabled. Note: This field supports a Maximum of 256 characters.
Maximum Number
of Dialed Digits
Configure the maximum digits allowed to dial in the keypad. Once the configured condition satisfied, the device will send
out the digit to call automatically without pressing #. Disabled if set to 0.
No Key Input
Timeout(s)
Defines the timeout (in seconds) for no key entry. If no key is pressed after the timeout, the digits will be sent out without
pressing #. The default value is 4 seconds. The valid range is from 1 to 15.
Press Doorbell
Schedule
Configure a schedule for the Doorbell button, once configured, the doorbell with turn ON/OFF based on configured
schedule. Default setting is “All Day”.
Remote PIN to
Open the Door
Configures PIN code stored in the GDS3710, remote SIP phone needs to input and match this PIN (the PIN is sent via
DTMF while in call) so that the GDS3710 can open the door.
Note: For enhanced security, when the call is initiated from GDS then only the numbers existing in “White List” will be able
to use DTMF PIN to open door remotely.
Local PIN Type
Three options are available: Private Card PIN, Unified PIN or Card and Private PIN.
●
Private PIN: Means every member has a private PIN, the GDS will record who unlocked the door every time. Users need
to enter the following sequence from the GDS3710 to open the door
[*Virtual Number*Private PIN#].
Notes:
1.
When Local PIN type is set to private PIN, users can also open the door by swiping their cards.
2.
If “Disable Keypad SIP Number Dialing” is checked, users will be able to open door using private PIN with following
sequence [Private PIN].
Note: Door can still be opened by Card and with the sequence [*Virtual Number*Private PIN].
For more details and conditions, refer to [Disable Keypad SIP Number Dialing].
●
Unified PIN: Means all members share a same PIN to unlock the door. Users need to enter the following sequence from
the GDS3710 keypad to open the door
[*Local PIN to Open the Door#].
Notes:
If “Disable Keypad SIP Number Dialing” is checked, users will be able to open door using Local PIN with following
sequence
[Local PIN].
●
Card & Private PIN: Means every member needs to swipe his card and enter his private PIN to open the door using the
following sequence [Swipe the card + * Private PIN#]
Note : This feature is available to be configured only on the GDS3710 Model.
Local PIN to Open
the Door
Configures PIN stored in GDS3710, input locally this PIN on the GDS3710 keypad will unlock the door.
This feature needs Private PIN, means every member has a private PIN, the GDS will record who unlocked the door every
time.
Users need to enter the following sequence from the GDS3710 to open the door [*Virtual Number*Private PIN#].
Note: When local PIN type is set to private card PIN, users can also open the door by swiping their cards.
Local PIN to Open
Door Schedule
Configure a schedule for the Local PIN to open the door. Once configured, the door opening ability using a local PIN with
turn ON/OFF based on a configured schedule. The default setting is “All Day”.
Enable DTMF Open
Door
When enabled, remote SIP phones can open the door while in call by entering the remote PIN code configured (the PIN
code is sent via DTMF). Default settings is disabled.
Enable Guest PIN
Enables password entry for guests.
Guest PIN
Configures the password that will be used by guests.