4.11
Before you attach the 602A’s to the sides
of the greenhouse you will need to remove the
ML01 nuts attached to the S03, L08C-X. See
diagram .
1. Use the S03/ML01 combos to attach the
FMZ to the base, and allow the L08C-X to rest,
set the 602A onto the S03 bolts attached to
the FMZ. Be sure the 602A is aligned and
sitting flush with bottom edge of the BASE.
See for reference. Tighten the ML01 nuts.
2. Hold the 602A in place and attach the top of
the 602A to the 609 using S04/ML01 (nut and
bolt). As shown in and .
* Note 6x4 size greenhouses you will install
only (1) 602A per side, and it will look like .
3. For 6x8 sizes repeat steps 1 and 2 on all
four corners where the L08C-X ‘s meet the
base, and replace with an FMZ.
4. If building a 6x8 size greenhouse attach
the remaining 602A’s to the FMZ and the
BASE with the S03/ML01 combo as shown
in . Then attach the top of the 602A to
the 609 with an S04/ML01, be sure to align
the top of the 602A to the exact line on the
609 as is shown in and .
J602A-E
Z03
J601
J602B-E
Z03
J602B-E
Z03
J602B-E
MIDDLE ASSEMBLY CONTINUED
4.24
For any size greenhouse if you have chosen to place a roof vent nearest the front or back you will need to locate the
ENDCAP PLUG, you will slide into the 607 track just before placing the J601 caps into place in next steps. See .
4.25
Attach caps to the ridge and gutters on both front and back as shown below. Squeeze a small amount of rubberized silicone
or construction adhesive into the ends of ridge to secure pressure fit end caps. You will need to quickly secure the Z03’s into the
J602A-E and J602B-E. It is recommended to caulk any areas that may allow water penetration such as around gutter end caps to
seal against water. It is helpful to apply a piece of tape on the outside of the endcaps so they seal tight to their intended extrusion,
remove tape within 24 hours once silicone has set.
4.26
It is recommended to apply silicone caulk to the seams where panels meet the frame for water resistance.
607
610
J601
J602A-E
Z03
49
Z03
ENDCAP PLUG
Summary of Contents for Grandio Element 6x4 with Base Kit
Page 67: ...NOTES NOTES...