2
1
38
4.8
With 2 people place the front section onto the base kit, aligning the corners with the base sides that have the edge. Have one
person hold the front vertically while the other attaches the font section to the base with W05/S03/ML01 fasteners. See ,
and . The (4) W05 Clips will catch the under edge of the front base kit and then slide upward attaching to the bottom of the
601A’s and the 604’s, you will switch out the S03/ML01 combos that were originally used for the 601A’s and 604’s over to the
W05 Clip Combo. If building a 6x8 you will have (4) L08C-X’s to attach for support, but if building a 6x4 you will only have(2)
L08C-X’s, so one person will have to hold onto the back wall while the other person prepares for the next step.
Base
BA-S7
W05
619
Inside
MIDDLE ASSEMBLY CONTINUED
BA-S2 or
BA-S8
601A
ML01
S03
Inside View
W05
BA-S7
ML01
S03
L08A-X
619
604-R
W05
601A
L08C-X
601A
L08C-X
Base
BA-S7
604R
604L
619
601B
601B
BACK
LEFT
RIGHT
FRONT
BA-S2 or
BA-S8
Summary of Contents for Grandio Element 6x4 with Base Kit
Page 67: ...NOTES NOTES...