4.3
Attach the 609-XS’s to the 609 with (4) of the S09 screws provided see and . The S09 screws are to be installed
on the outside of the 609 and will tighten into the 609-X as shown in the diagrams. Repeat with other set, note they will be
opposite of each other when assembled. Make sure the 609-4X’s are toward the back of the greenhouse.
Pay special attention to the orientation of the 609, make sure the correct side faces down, see .
4.4
Locate the (2) 609-4X’s, align each with the 609 and 609-XS brackets. Make sure that no notches are right next to
each other. If the 609 pieces are matching up correctly, match to , use the S09 screws to attach the 609-4X extension
pieces to the 609’s. Screws will install from the outside.
609
Profile View
Groove
UP
MIDDLE ASSEMBLY INSTRUCTIONS CONTINUED
THIS PAGE SHOWS 6X12 EXTENSION KIT ASSEMBLY ONLY, SKIP AHEAD TO PAGE 37 FOR 6X4 OR 6X8 SIZES.
36
609
609-XS
FRONT
INSIDE VIEW
UP
609
INSIDE VIEW
FRONT
609-Extension
BACK
INSIDE
OUTSIDE
UP
FRONT
OUTSIDE VIEW
609-XS
609
S09
Summary of Contents for Grandio Element 6x4 with Base Kit
Page 67: ...NOTES NOTES...
