background image

2

WARNING

READ THIS SECTION FIRST BEFORE INSTALLING THE GRILL

ƒ

This grill is designed to use LP (Liquid Propane) gas only. Please use the grill with 
the regulator supplied by PermaSteel. 

ƒ

The installation of this appliance must conform with local codes or, in the absence 
of local codes, with either the

National Fuel Gas Code, ANSI Z223. 1, or 

CAN/CGA B149.1, Natural Gas Installation Code or CAN/CGA-B149.2, Propane 
Installation Code.

ƒ

The LP-gas supply cylinder is to be constructed and marked in accordance with the 
specifications for LP-gas cylinders of the 

U.S. Department of Transportation 

(DOT) 

or 

the National Standard of Canada, CAN/CSA-B339, Cylinders, 

Spheres and Tubes for the Transportation of Dangerous Goods.

ƒ

If an external electrical source is utilized, the outdoor cooking gas appliance, when 

installed, must be electrically grounded in accordance with local codes or, in the 
absence of local codes, with

the National Electrical Code, ANSI/NFPA 70-1990

or

the Canadian Electrical Code, CSA C22.1

.  Keep the power cord of the motor 

away from the hot surfaces of the grill while in use. Remove and store the motor in 
a dry place when not in use.

ƒ

This grill is safety certified for use in the United States and Canada only. Never 
modify to use in other places. Modification may cause serious bodily injury or 
property damage. PermaSteel is not responsible for any modifications, and all 
warranties will be void. 

INSTALLATION/SAFETY PRECAUTIONS

PROPANE & GAS WARNING

Summary of Contents for PG-50410SRLB


































Reviews: