Grand Design Solitude 2017, Owner'S Manual

Page: 84 / 204

82
Towing & Leveling
Overriding the Hydraulic
Landing Legs / Leveling Legs / Slides
There are two options when overriding the hydraulic leveling
legs. The instructions for both options reference the override
valves labeled in the sidebar photos.
• Rotating a hydraulic system override valve
clockwise will open it.
• Rotating a hydraulic system override valve
counter-clockwise will close it.
Valve Description *
Typical Location
on the Solitude
A
Extend/Retract the
Front Landing Legs.
Forward Door Side
LP Compartment
B
Extend/Retract the
Door Side Leveling Legs.
Front Compartment
C
Extend/Retract the
Off-Door Side Leveling Legs.
Front Compartment
D
Open/Close the
Slide Room Valve Block
(Which Houses Valve E & F)
Front Compartment
E
Extend/Retract the Hydraulic
Door Side Slide Room
Forward Door Side
LP Compartment
F
Extend/Retract the Hydraulic
Off-Door Side Slide Room
Forward Door Side
LP Compartment
Option 1 – using the “Slide Room 1” button
1. Make sure valve D is open. To open valve D , insert
a 5/32” Allen wrench into the manual override and
rotate it 1.5 to 2 turns clockwise .
2. Extend or retract the appropriate slide room by
opening or closing valves E and F .
3. Open valves B and C by inserting a 5/32” Allen
wrench into the manual override and rotating
it 1.5 to 2 turns clockwise .
4. Extend or retract the leveling legs as needed
by pressing the “Slide Room 1” button, located
in the Command Center.
Valves A , E & F
Are Located in the Forward,
Door-Side LP Compartment
Valves B , C , D & Coupler G
Are Located in the
Front Compartment
A
B, C, D
E & F
G