Grand Design Solitude 2017, Owner'S Manual

Page: 89 / 204

87
Auto Level
1. After unhitching from tow vehicle and parking the vehicle
at a safe distance away from the trailer, press the “ON/
OFF” button and then press “AUTO LEVEL” (Fig. 1F).
NOTE: Once the automatic leveling cycle has been started,
it is important that there is no movement in the trailer until the
trailer has completed the leveling process. Failure to remain
still during the leveling cycle could have an effect on the per-
formance of the leveling system.
NOTE: In order for hitch recognition feature to function, the
auto level sequence MUST be started with the front of the
trailer above level.
Auto Level Sequence
1. When Auto Level Sequence begins, the front of the trail-
er will lower slightly to a point below level.
2. Rear jacks will be grounded.
3. A side to side leveling sequence occurs.
NOTE:
At this point on the 6 point system, the 2 middle jacks
are grounded to stabilize the trailer. These 2 jacks do not
level the trailer.
4. Each jack will perform a final grounding touch.
5. LCD will read “AUTO LEVEL SUCCESS”(Fig. 3).
6. LCD will then read “READY Jacks: Down”, and
the green LED at the center of the (Fig. 4A) jack buttons
will be illuminated (Fig. 4B).
Fig. 4
Towing & Leveling
Fig. 5