Grafenthal R2210 S2, User Manual

Page: 4 / 99

4
1
The power supply equipment in the system may generate high voltage and
dangerous electrical energy and thus cause personal injury. Please do not dismount
the cover of the host or to dismount and replace any component in the system by
yourself, unless otherwise informed by the distributor; only maintenance technicians
trained by the distributor have the right to disassemble the cover of the host,
dismount and replace the
internal components.
2
Please connect the equipment to appropriate power supply, and the power should
be supplied by external power supply which is indicated on the rated input label. To
prevent your equipment from damages caused by momentary spike or plunge of the
voltage, please use relevant voltage stabilizing equipment or uninterruptible power
supply equipment.
3
If extended cables are needed, please use the three-core cables matched with correct
earthed plug, and check the ratings of the extended cables to make sure that the sum
of rated current of all products inserted into the extended cables do not exceed 80%
of the
limits of the rated currents of the extended cables.
4
Please be sure to use the supplied power supply component, such as power lines,
power socket (if supplied with the equipment) etc. For the safety of equipment and
the user, do
not replace randomly power cables or plugs.
5
To prevent electric shock dangers caused by leakage in the system, please make sure
that the power cables of the system and peripheral equipment are correctly
connected to the earthed power socket. Please connect the three-core power line
plug to the threecore AC power socket that is well earthed and easy to access, be sure
to use the earthing pin of power lines and do not use the patch plug or the earthing
pin unplugged with cables. In case of the earthing conductors not installed and it is
uncertain whether there are appropriate earthing protections, please do not operate
or use the equipment. Contact
and consult with the electrician.
6
To avoid short circuit of internal components and fi re or electric shock hazards,
please do not fi ll any object into the open pores of the system.
7
Please place the system far away from the cooling plate and at the place with heat
sources, and be sure not to block the air vents.
8
Be sure not to scatter food or liquid in the system or on other components, and do
not
use the product in humid and dusty environment.