Grafenthal R2210 S2, User Manual, Page: 8 / 99

8
2)
It shall install into the cabinet according to the sequences from the bottom to the
top,
and fi rst install the heaviest component.
3)
When pulling out the components from the cabinet, it shall apply force slightly to
ensure the cabinet to keep balance and stabilization.
4)
When pressing down the release latch of the sliding rail of components and sliding
in or out, please be careful, as the sliding rail may hurt your fi gures.
5)
Never make the AC power branch circuit in the cabinet overload. The sum of
cabinet
load shall not exceed 80% of the ratings of branch circuits.
6)
Ensure that components in the cabinet have good ventilation.
7)
When repairing components in the cabinet, never step on any other components.