Grafenthal R2210 S2, User Manual

Page: 5 / 99

5
9
The replacement of batteries with those of another model may cause explosion.
When replacement of batteries is required, please consult fi rst the manufacturer and
choose batteries of the same or a similar model recommended by the manufacturer.
Do not dismount, extrude and pink the batteries or make the external connection
point short circuit, and do not expose them in the environment over 60°C. Never
throw them into fi re or water. Please do not try to open or repair the batteries, and
be sure to reasonably deal with the fl at batteries and do not put the fl at batteries,
the circuit boards that may
include the batteries and other components with other wastes. For relevant battery
recovery, please contact the local waste recovery and treatment mechanism.
10
Before installing equipment in the chassis, please install front and side supporting
feet on the independent chassis; for cabinet connecting with other chassis, it shall
install the front supporting foot fi rst. If you fail to install correspondingly the
supporting foot before installing equipment in the chassis, it may cause the cabinet
to turn over in some cases, and thus may cause personal injury. Therefore, it is
necessary to install supporting feet before installing equipment in the chassis. After
installing the equipment and other components in the chassis, it can only pull out one
component from the cabinet through its sliding component at one time. Pulling out
several components at the same time may
lead the cabinet to turn over and cause serious personal injury.
11
Please do not move the chassis independently. Considering the height and weight of
the
chassis, at least two people are needed to complete its movement.
12
Please do not carry out direct contact operation on power copper busbar when the
cabinet is powered on, and it is prohibited to carry out direct short circuit of power
copper busbar.
13
The product is Grade A product, and in the living environment, it may cause radio
interference. In such case, it may need the user to take feasible measures for the
interference.
Note: In order to help you use the equipment, the following considerations can help avoid
the occurrence of problems that may damage the components or cause data loss etc.
Safety Introduction
1
In case of the following cases, please unplug the power line plug of products from the
power socket and contact customer service department of the distributor:
1)
The power cables, extended cables or power plugs are damaged.
2)
The products get wet by water.