Grafco GF-TX5, Instruction Manual

Page: 16 / 19

MAINTENANCE, TRANSPORTATION
AND STORAGE OF T.E.N.S. DEVICE
1) Non-flammable cleaning solution is suitable
for cleaning the device.
Note : Do not smoke or work with open lights
(for example, candles, etc.) or while working
with flammable liquids.
2) Stains and spots can be removed with a
cleaning agent.
3) Do not submerge the device in liquids or
expose it to large amounts of water.
4) Return the device to the carrying box with
sponge foam to ensure that the T.E.N.S.
unit is well-protected before transportation.
If the device is not to be used for a long
period of time, remove the batteries from
the battery compartment (acid may leak
from used batteries and may damage the
device). Put the device and accessories in
carrying box and store it in cool dry place.
5) The T.E.N.S. device should be stored and
transported under the temperature range
of -20 C
∼
+ 60 C, relative humidity 20%
∼
95%, atmosphere pressure 500 hPa
∼
1060 hPa.
28 27
REMOVING ELECTRODES/
LEADWIRES
It is strongly recommended to leave the lead
wires plugged into the unit to lessen the
possibility of breakage. If it is necessary to
unplug them, turn both Channel controls to
"O" OFF. Unplug by grasping them by the plug
and pull straight up. Do not twist. If treatment
will be resumed shortly, the electrodes may
be left on the skin. When the electrodes are
removed, clean the skin thoroughly with soap
and water. If there is skin irritation, consult
your medical professional.
When the LCD becomes dim, it means the
battery should be replaced with a new one as
soon as possible. However the stimulator will
continue to operate for a few more hours.
。 。