Grafco GF-TX5, Instruction Manual

Page: 7 / 19

ATTACHMENT OF
ELECTRODE LEAD WIRES
1) Connect the wire and main unit
The wires provided with the system insert into
the jack sockets located on right side of the
device. Holding the insulated portion of the
connector, push the plug end of the wire into
one of the jacks (see drawing); one or two sets
of wires may be used.
2) Electrode lead wires
The use of the electrically conductive medium
is subject to the specifications of the component
parts contained in the unit or recommended by
the dealer.
10 9
ACCESSORIES
Each set GF-TX5 is complete with:
1) Adhesive electrodes 4 pieces
2) Electrodes leads 2 pieces
3) 9 VDC battery 1 piece
4) Instruction manual 1 piece
5) Carrying case 1 piece
6) Replacement electrodes
ITEM 9260
2" Pre-Gelled T.E.N.S. electrodes
Output plug
(plugs into
output receptacle) Pin Connectors
(plugs into electrodes)
(neg)
(pos)
Electrode
Electrode Pin Socket