Grafco GF-TX5, Instruction Manual

Page: 14 / 19

OPERATING INSTRUCTION
1) Turn the device "On" by turning channel 1
or channel 2 amplitude knobs located on
the top of the unit clockwise.
2) Push the top slide cover from up to down to
expose the Mode control section.
3) Mode Control : Choose the output mode by
press MODE (B,M,C,A&S) key. The five
therapeutical mode will show up from one
to another and rotate accordingly.
4) The PW/PR/Timer control : Press the SET
key to adjust these 3 functions. When press
the SET key, the 3 functions will show up
from one to another and rotate accordingly.
5) The LCD panel will display :
PW From 30 to 300uS, with 10uS/step.
PR From 1 to 150 Hz, with 45 levels.
Timer From 1 to 60 minutes, with 1 min./step.
The display will show PR, then PW, then,
Timer. To adjust these 3 functions by using
the and keys. The digit number goes
from one digit to the next digit, increase or
decrease.
6) Setting Value : Press the or over 1
second, the digital numbers will increase /
decrease rapidly.
7) Battery power indicator :
full-scale battery, power full
half-scale battery, power low
24 23
Decrease Button
When pressing this button, the pulse rate will
decrease gradually
7) The device will store the mode that is
used before it is switched oFF
automatically.
8) Check/ Replace the Battery
Over time, in order to ensure the functional
safety and effectiveness of T.E.N.S., it is
necessary to change the battery.
" "Full-scale battery, power full
" "Half-scale battery, power low
8.1) Make sure that both intensity controls are
switched to the Off position.
8.2) Slide the battery compartment cover and
open.
8.3) Remove the battery from the compartment.
8.4) Insert the battery into the compartment.
Note the polarity labels, (+ and -), on the
battery and in the compartment and insert
accordingly.
8.5) Replace the battery compartment cover
and press to close.
I
I