manualshive.com logo in svg

Graef VA 802, Operating Manual, Page: 23 / 58

Share
Download
Graef VA 802 Operating Manual Download Page 23

Operation

23

x

Select the placing programme and specify the 
number of slices with the PLUS-MINUS buttons 
+/- if necessary. 

x

Use the “S“ button to select the carriage stroke 
speed and adjust it using the PLUS-MINUS 
b/- if necessary.

x

Press the yellow Start button. 

x

The slicing process begins. 

x

If necessary, you can adjust the stroke speed 
directly during operation using the PLUS-MINUS 
b/-. 

x

If you press the yellow button again, the 
programme will be terminated. The carriage 
returns to the starting position. Press the button 
again to continue the programme.

3.2.3.

Semi-automatic Function (Option) 

Model VA 802 has the additional option of moving the carriage manually. 
This semi-automatic mode is especially suitable if a small number of slices of different 

food types are to be sliced directly for the customer. 

x

Press the off button to switch off the machine. 

x

Turn the T-handle to a horizontal position. 

Summary of Contents for VA 802



























































Reviews:

No comments