Operation
17
3.2. Programmes
You can either work in the standard mode or access specially defined placing
programmes through PLU. The standard mode makes it possible to combine basic
functions such as stacking, long-shingling, cross-shingling or circular shingling with the
following parameters: number of slices, stroke speed and number rows/stacks.
3.2.1. Slicing in the Standard Mode (PLU=0000)
3.2.1.1.
Stackinging
The stacking function enables stack heights of up to 60 mm.
This function is selected by simply pressing the stack button. The display shows the
symbol for stacking. You can preset the number of slices using the plus/minus buttons.
If multiple stacks are desired, you can increase the number of stacks with the “X“ button.
Up to 4 stacks are possible.
When making preparations, it is recommended to set the slice counter to “000”.
In this way, the maximum stack height is always achieved.
If stacks are to be generated on portioning units (foils, PE trays, foam trays, trays etc.),
you can enter the outer dimensions of the portioning units L x W for central placing.
(Option: the machine then uses the calibre recognition option to calculate the best
placing point).
Other Operating Controls
Slice thickness regulator
x
Sets the slice thickness
x
Sets the limit stop lock
x
Sets the sharpening mode
Last slice clamp
x
Clamps and feeds the food to be sliced to the blade
Return lever
x
Releases the last slice clamp from the feeder shaft so
that it can be moved freely, e.g. when new food is
being clamped
Yellow Start-Stop button
x
Starts the cutting process
x
Stops the cutting process
