Grady-White Boats EXPRESS 265, Owner'S Manual

Page: 33 / 74

M
AINTENANCE AND
S
ERVICE
6–1
C
HAPTER
6: M
AINTENANCE AND
S
ERVICE
G
ENERAL
The amount of maintenance required to keep your boat operating properly and to maintain the
appearance is dependent on how the boat is used, amount of usage, salt or fresh water, geographic
location, etc.
Your hull and deck are constructed by the “hand lay-up method” using the highest quality
fiberglass mat and woven roving. This method of construction ensures a proper fiberglass-to-resin
ratio and a uniform thickness which together result in a much stronger boat than those constructed
of “chopped glass”. This is an expensive process, but ensures that your Grady-White is the stron-
gest most durable fiberglass boat possible.
Keep the bilge area clean and dry. Leaks found early and corrected will less likely cause dam-
age. Do not allow grease, grime and dirt to build up.
Proper maintenance of your boat is not only a source of pride; it is the key to maintaining your
boat's value. A few simple steps will keep your fiberglass Grady-White looking showroom bright
for years.
E
XTERIOR
F
IBERGLASS
F
INISH
The exterior finish of your Grady-White is a thin layer of resin with a finished color pigment
called gelcoat. It is used for cosmetic purposes and makes routine maintenance relatively simple.
Although gelcoat has a hard smooth surface, it does contain microscopic pores that will allow sur-
face discoloration if not kept clean.
M
AINTENANCE
Normal exterior finish maintenance of your Grady-White is similar to the care you would give
your automobile. Do not use caustic, highly alkaline cleaners or those containing ammonia.
These cleaning agents may darken gelcoat. The resulting stain is a chemical reaction and can
be removed with a rubbing compound followed by waxing.
C
LEANING
The best way to prevent discoloration and soil build-up is to hose the boat with fresh water
after each outing or on a regular basis. This build-up is the result of use and environmental
pollutants. Clean the boat regularly with a mild household detergent and plenty of fresh water.
Avoid strong detergents, citrus based cleaners or bleaches; these are potentially harmful to the
appearance and durability of your boat’s gelcoat. Use a sponge on smooth surfaces and the
deck. A brush can be used on the nonskid areas. Rinse away all grime and residue.