Instructions - Parts
SmartWare
™
Shot
Dispense Kit
Accurate metered dispensing kit for one component materials. Kits are compatible with
Check-Mate
®
pumps and Dura-Flo
™
pumps; both alone and as part of a supply system. For
professional use only.
Not approved for use in European explosive atmosphere locations.
Kit 262370 for D200 and D60
For D200 3 inch dual post ram with NXT
®
2200 and larger air motors
For D60 3 inch dual post ram with NXT2200 and larger air motors
Kit 262371 for D200
For D200 3 inch dual post ram with NXT1800 and smaller air motors
Kit 262372 for D200S
For D200S 6 inch dual post ram with NXT2200 and larger air motors
Kit 262373 for S20
For S20 3 inch single post ram NXT2200 and larger air motors
Kit 262374 for S20
For S20 3 inch single post ram with NXT1800 and smaller air motors
Kit 262375 for pumps
For wall mount or floor stand pump with NXT2200 and larger air
motors
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.
Kit 262370 Shown
3A0294J
EN
Summary of Contents for SmartWare 262370
