Graco SaniForce 3A5416L, Operation

Page: 50 / 82

Electro-pneumatic Control Panel Display Screens
Event Event Event
Type
Type Type Event Event Event Description Description Description
Error Error Error
Code
Code Code Cause Cause Cause Fix Fix Fix
Alarm Network
Initialization Error
CA0R
An error occurred while
initializing the system for
network communication Restart the system. Contact Graco
Support if the problem persists.
Alarm Network Interlock
Open EB0R The network interlock is tripped Ensure proper output from the
remote controller or disable the
remote connection.
Alarm Pump supply
pressure low
P1PP
Pump supply pressure sensor
reads pressure more than 5 psi
below the pressure being driven Increase supply air pressure or
reduce pressure required by the
current recipe.
Alarm Pump supply
pressure sensor
error WMPP Pump supply pressure
sensor reports an error Check pump supply pressure sensor
and wiring.
Alarm
Ram movement
timeout EU1R
Upward ram movement has
not reached the minimum
height when the ram movement
timeout completes Check ram for obstructions to
movement, manually raise ram.
Alarm Seal inflation
timeout
EU1S
Seal has not inflated to within
1.0 psi of the value being driven
when the seal inflation timeout
completes Check seal and air lines.
Alarm
Seal not deflated
P71S Seal pressure sensor does not
read the seal is depressurized
after seal deflation timeout
completes
Check seal, manually deflate seal,
adjust Seal Deflate Time in recipe.
Alarm Seal pressure sensor
error WMPS Seal pressure sensor reports an
error Check seal pressure sensor and
wiring.
Alarm
Software Error
WX00 Unexpected state detected in
the software
Acknowledge the alarm. If the alarm
is triggered regularly, contact Graco.
Alarm X20AO2622 analog
output module error WMCA X20AO2622 module reports an
error Check X20AO2622 module and
wiring. Verify that the modules are
installed in the proper locations*.
Alarm X20BC1083 bus
coupler module
error
WMCB
X20BC1083 module reports an
error Check X20BC1083 module and
wiring. Verify that the modules are
installed in the proper locations*.
Alarm X20CM8281 mixed
module error WMCC X20CM8281 module reports an
error Check X20CM8281 module and
wiring. Verify that the modules are
installed in the proper locations*.
Alarm X20DO8322 digital
output module error
WMCD
X20DO8322 module reports an
error Check X20DO8322 module and
wiring. Verify that the modules are
installed in the proper locations*.
Alarm X20DS438A IO-LINK
module error WMCS X20DS438A module reports an
error Check X20DS438A module and
wiring. Verify that the modules are
installed in the proper locations*.
Alarm
X20PS9400 power
supply module error WMCP
X20PS9400 module reports an
error Check X20PS9400 module and
wiring. Verify that the modules are
installed in the proper locations*.
Devia-
tion File not found WSU0 The file targeted by a USB
Import could not be found. Verify the file name is correct (has
not been changed from the name
given during a USB export) and that
it is located within a directory named
"STU-[serial number]".
50 3A5416L