Graco SaniForce 3A5416L, Operation

Page: 62 / 82

Electro-pneumatic Control Panel Display Screens
Outputs Outputs Outputs from from from the the the Allen Allen Allen- - -Bradley Bradley Bradley Controller Controller Controller
Variable Variable
Variable Name
Name
Name Data Data
Data Type
Type
Type
Possible Possible
Possible
Values
Values Values
Notes Notes
Notes
AB2BR_rec_airAssistPres-
sure_psi REAL REAL
Corresponds to bit 9 in the
AB2BR_networkOverwriteBitfield
variable. Units in psi.
AB2BR_rec_primeTime_s INT INT
Corresponds to bit 10 in the
AB2BR_networkOverwriteBitfield
variable. Units in seconds.
AB2BR_rec_emptyTime_s INT INT Corresponds to bit 11 in the
AB2BR_networkOverwriteBitfield
variable. Units in seconds.
AB2BR_rec_sealDeflateTime_s
INT INT
Corresponds to bit 12 in the
AB2BR_networkOverwriteBitfield
variable. Units in seconds.
AB2BR_rec_airAssistTime_s
INT INT
Corresponds to bit 13 in the
AB2BR_networkOverwriteBitfield
variable. Units in seconds.
AB2BR_rec_batchAmount-
Mass_lbs
REAL REAL
Corresponds to bit 14 in the
AB2BR_networkOverwriteBitfield
variable. If batching is enabled, the
evacuation will halt when the amount
of material pumped matches this
value. Units in pounds.
AB2BR_rec_batchAmountVol-
ume_gal
REAL REAL
Corresponds to bit 15 in the
AB2BR_networkOverwriteBitfield
variable. If batching is enabled, the
evacuation will halt when the amount
of material pumped matches this
value. Units in gallons.
AB2BR_batchEnabled
BOOL TRUE, FALSE
Corresponds to bit 16 in the
AB2BR_networkOverwriteBitfield
variable. This switches between
an "Auto" sequence and a "Batch"
sequence.
AB2BR_networkOverwriteBit-
field
DINT
Bitfield This variable is used as a bitfield,
where every denoted output variable
has a corresponding bit. If the remote
PLC intends the STU to read the
value in from the Ethernet/IP network
interface and make it active in the
system, the corresponding bit for
that variable must be set to TRUE
in this bitfield. When a bit is set to
TRUE, any value changes from the
STU's touchscreen (including loading
a new recipe) will be overwritten by
the network value, unless “Override
Remote” is checked on the STU
Network screen. When a bit is FALSE,
the STU system ignores the network
value.
62 3A5416L