![background image](http://html1.mh-extra.com/html/graco/saniforce-3a5416l/saniforce-3a5416l_operation_2251593016.webp)
Safety
Safety
Safety Latch
Latch
Latch
The overall system weighs about 2400–3400
lb. (1089–1542 kg). To prevent being trapped
under the ram plate, always set the manual
safety latch to the Engage position when
working under the plate.
Install
Install
Install Lockout
Lockout
Lockout Extension
Extension
Extension
A safety latch lockout extension rod (W) is
provided for use on the safety latch. Installation
of the extension rod requires the safety latch
to be disengaged.
1. Disengage the safety latch. See Disengaging
Disengaging
Disengaging
the
the
the Safety
Safety
Safety Latch
Latch
Latch.
2. Use the Ram Jog icon to lower the ram plate
to its lowest position.
3. Follow the
Pressure Relief Procedure, page
.
4. Insert the safety latch extension rod (W)
through the bracket (X). With the polymer
insert nut provided, attach the extension rod
to the safety latch at the D-shaped hole on
the latch.
Safety
Safety
Safety Latch
Latch
Latch Lockout
Lockout
Lockout
Lockout/tagout holes have been provided to
lock the ram in the raised position.
1. Push the safety latch handle all the way in to
align the lockout/tagout holes (Y).
2. Insert a padlock through the hole and lock
in place.
Engaging
Engaging
Engaging the
the
the Safety
Safety
Safety Latch
Latch
Latch
1. Using the ram position selector, raise ram
until it stops at the maximum height.
NOTE:
NOTE:
NOTE: The safety latch must align with the
grooves in the cylinder center rods to move.
2. Push the safety latch handle in the direction
shown to engage with the groove in the
cylinder rod (shown engaged).
Disengaging
Disengaging
Disengaging the
the
the Safety
Safety
Safety Latch
Latch
Latch
1. Using the ram position control panel
selector, make sure the plate is raised all the
way up (not resting on the safety latch).
2. Pull the safety latch handle all the way out to
disengage the groove in the cylinder rod.
16
3A5416L