9
Ve
hicle
Information
100
Sliding Latch Plate and ELR Retractor
A latchplate that slides freely on the belt webbing and cannot,
by itself, hold the belt snug around a car seat.
With this retractor, you will need to use the locking clip to
lock the vehicle seat belt.
Call us at 1-800-345-4109 to order a locking clip.
Route the vehicle seat belt through the proper belt path and
buckle it in. Pull the vehicle seat belt tight. While pushing
down on seat, pinch the two straps together behind the
buckle tongue. Unbuckle the belt without allowing it to slip.
Attach locking clip to lap and shoulder belts as shown.
Rebuckle belt. Check that lap belt does not move by pulling
hard. If belt loosens or lengthens, repeat procedure.
Note: if you use the lock-off, you do not need a locking clip.
1” (2.5 cm)