![background image](http://html1.mh-extra.com/html/graco/recline-n-ride-on-the-go/recline-n-ride-on-the-go_instruction-manual_2250846098.webp)
9
Ve
hicle
Information
98
Locking Latchplate and ELR Retractor
A latchplate that holds the lap belt snug after it has been
adjusted; contains a metal bar on the underside of the
hardware that “locks” the belt in position.
When installing the car seat, route the vehicle seat belt
through the proper belt path and buckle it in. Then, pull
upwards on the shoulder belt so that the lap belt gets tight
around the car seat.
Grab the sides of the seat at the belt path and slide the seat
side-to-side and front-to-back. The seat should not move
more than 1” (2.5 cm).
Sliding Latch Plate and ALR Retractor
A latchplate that slides freely on the belt webbing and cannot,
by itself, hold the belt snug around a car seat.
Slowly pull the shoulder belt all the way out.
Route the
vehicle seat belt through the proper belt path and buckle it in.
Then, as you pull the vehicle seat belt tight, feed all the slack
back into the retractor.
Grab the sides of the seat at the belt path and slide the seat
side-to-side and front-to-back. The seat should not move
more than 1” (2.5 cm).