Overview
10
3A1602H
Overview
The Reactor E-8p is a portable, electric-powered, 1:1
mix ratio proportioner. It is for use with formulated
no-heat polyurethane foams that may be applied with
impingement mix spray guns and for use with polyurea
joint fill materials that may be applied with static mix
guns.
Severe duty, positive displacement reciprocating piston
pumps meter fluid flow to the gun for mixing and apply-
ing. When set to recirculation mode, the Reactor E-8p
will circulate fluids back to the supply pails.
An electronic processor controls the motor, monitors
fluid pressures, and alerts the operator if errors occur.
See
STATUS Indicator
, page 12, for further informa-
tion.
The Reactor E-8p has two recirculation speeds: slow
and fast, and an adjustable pressure output.
Slow Recirculation
•
Use for pump priming.
Fast Recirculation
•
Use for flushing.
•
Use for pump priming.
Pressure Adjust
Automatically maintains selected pressure output for
spraying.
Summary of Contents for Reactor E-8p 3A1602H
Page 16: ...Setup 16 3A1602H 12 Install fluid tubes 36...
Page 36: ...Repair 36 3A1602H FIG 56 Function Knob Potentiometer ti17465a 10 61 12 16a 23 22 87 16 N S P...
Page 40: ...Repair 40 3A1602H FIG 59 Pressure Transducer Connection 35 ti17467a 33...
Page 56: ...Dimensions 56 3A1602H Dimensions 34 58 in 87 8 cm 24 12 in 61 3 cm 15 06 in 38 3 cm TI17120a...
