Replace HCM
1. Follow
Before Beginning Repair, page 52
.
2. Open the electrical enclosure and disconnect all
cables from the HCM (603).
3. Remove the nuts (610) and HCM (603).
4. Set rotary switch.
Figure 13 Replace HCM
HCM Rotary Switch Positions
0 = Reactor 2, H-30
1 = Reactor 2, H-40
2 = Reactor 2, H-50
3 = Reactor 2, H-XP2
4 = Reactor 2, H-XP3
Replace ADM
1. Loosen four screws (70) on inside of electrical
enclosure door (61). Lift up and pull out to
remove ADM (88).
2. Disconnect CAN cable (475).
3. Inspect ADM (88) for damage. Replace if
necessary.
Figure 14
66
334946A