Graco Reactor 2 H-30, Manual, Page: 87 / 102

Parts
Fluid Inlet Kits
17G644, Standard
1
Orientate ball valves as shown.
2
Apply tape to threads of housing.
3
Apply thermal lubricant completely covering
thermometer probe (904) before inserting in to
housing (910).
4
Apply grease to o-ring (907).
5. Apply sealant to all tapered pipe threads. Apply
sealant to female threads. Brush into, at least,
the first four threads and approximately 1/4 turn
wide.
6.
Orientate gauges vertically within assembly.
Ref. Part Description Qty.
901 118459 FITTING, union, swivel
3/4 in.
4
902 16W714 MANIFOLD, strainer,
inlet
2
903 C20487 FITTING, nipple, hex 2
904 16W117 THERMOMETER, dial 2
905 16T872 GAUGE, pressure, fluid 2
906 180199 FILTER, replacent 2
907 128061 PACKING, o-ring, FX75 2
Ref. Part Description Qty.
908 16V879 CAP, filter 2
909 555808 PLUG, 1/4 mp with hex
hd
2
910 15D757 HOUSING, thermometer 2
911 109077 VALVE, ball 3/4 npt 2
912 253481 GUARD, gauge,
y-strainer
2
913 111800 SCREW, cap, hex hd;
5/8 in., 5/16–18
4
334946A 87