Description
334371A
3
Description
P is an electrically operated protective device that monitors the supply voltage to
Graco electrical equipment. If there are excessive voltage fluctuations (high or low) P
disconnects the equipment from the power source to reduce the risk of damage to the
equipment. P automatically resets after a one minute delay when acceptable power
is available.
Operation of the P is indicated by a multi-color LED.
The power cord includes a ground wire with an appropriate ground contact. Do not use
P if the electrical cord has a damaged ground contact. The cord must be plugged
into an outlet that is properly installed and grounded in accordance with all local codes and
ordinances.
LED
Definition
LED is ON
When the LED is solid green the P is powered and
in normal operation.
LED is BLINKING
When the LED blinks red the supply voltage is too low or too
high for the equipment and will not run until it is plugged into a
good power supply.
LED is OFF
No power to P.
ti24427a
Multi-Color LED
ti24517a
ti24533a
ti24518a
ti24534a
