309375 5
WARNING
FIRE, EXPLOSION, AND ELECTRIC SHOCK HAZARD
Improper grounding, poor air ventilation, open flames, or sparks can cause a hazardous condition and
result in fire or explosion and serious injury.
D
Ground the equipment and the object being sprayed. The PrecisionFlo metering valve is grounded
through proper connection of the two electrical cables. See Ground the Fluid Metering Assem-
bly on page 11.
D
If there is any static sparking or you feel an electric shock while using the equipment, stop dis-
pensing immediately. Do not use the equipment until you have identified and corrected the
problem.
D
Make sure all electrical work is performed by a qualified electrician only.
D
Have any checks, installation, or service to electrical equipment performed by a qualified electrician
only.
D
Make sure all electrical equipment is installed and operated in compliance with applicable codes.
D
Do not install the PrecisionFlo module in a hazardous area, as defined in Article 500 of the National
Electrical Code (USA).
D
Make sure power is disconnected when servicing and repairing equipment.
D
Keep the dispensing area free of debris, including solvent, rags, and gasoline.
D
Before operating the equipment, extinguish all open flames or pilot lights in the dispense area.
D
Do not smoke in the dispensing area.
D
Disconnect the two electrical cables from the PrecisionFlo metering valve before servicing the
valve.
D
Keep liquids away from the electrical components
D
Turn off power to the PrecisionFlo module before disconnecting any cables connected to the con-
trol assembly or fluid metering assembly.
D
Disconnect electrical power at the main switch before servicing the equipment.
Summary of Contents for PrecisionFlo XL
Page 33: ...309375 33 Notes...