![background image](http://html1.mh-extra.com/html/graco/precisionflo-xl/precisionflo-xl_manual_2251228004.webp)
4 309375
WARNING
INSTRUCTIONS
EQUIPMENT MISUSE HAZARD
Equipment misuse can cause the equipment to rupture, malfunction, or start unexpectedly and
result in serious injury.
D
This equipment is for professional use only.
D
Read all instruction manuals, warnings, tags, and labels before operating the equipment.
D
Use the equipment only for its intended purpose. If you are uncertain about usage, call your
Graco distributor.
D
Only use the PrecisionFlo metering valve with the PrecisionFlo Control Assembly.
D
Only use a dispensing device appropriate for the fluid and application method, and capable of
operating at the highest possible fluid supply pressure the module may experience.
D
Do not alter or modify this equipment. Use only genuine Graco parts and accessories.
D
Check the equipment daily. Repair or replace worn or damaged parts immediately.
D
Do not disassemble the PrecisionFlo metering valve motor. The motor contains powerful mag-
nets, which could attract metal objects and create a hazardous condition if the motor end plates
are removed. Contact your Graco distributor for motor service.
D
Do not exceed the maximum working pressure of the lowest rated system component. The
maximum working pressure of the PrecisionFlo metering valve is shown on the fluid head.
Other components may have lower working pressure ratings.
D
Route hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not
expose Graco hoses to temperatures above 180
_
F (82
_
C) or below –40
_
F (–40
_
C).
D
Do not use the hoses to pull the equipment.
D
Use only fluids that are compatible with the equipment wetted parts. See the Technical Data
sections of all the equipment manuals. Read the fluid manufacturer’s warnings.
D
Comply with all applicable local, state and national fire, electrical and other safety regulations.
D
Do not touch the metal heat sink on the metering valve when the surface is hot.
D
Do not cover the PrecisionFlo metering valve; the motor needs air ventilation for cooling.
D
Do not attempt to modify the programming of the module. Any modification of the programming
could result in serious injury or damage to the module.
MOVING PARTS HAZARD
Moving parts, such as the fluid needle, can pinch fingers.
D
Do not operate the equipment with the guard removed.
D
Keep clear of any moving parts when starting or operating the equipment.
Summary of Contents for PrecisionFlo XL
Page 33: ...309375 33 Notes...