background image

27

Displ. 

DELETED

147 109–110

V–Packing

Pump

DELETED

148 183–858

M. Gland

217–201

DELETED

149 183–753

F. Gland

DELETED

150 109–111

V–Packing

DELETED

151 183–856

F. Gland

DELETED

154 183–859

F. Gland

DELETED

155 109–036

V–Packing

DELETED

156 109–037

V–Packing

DELETED

157 185–385

Shim

ADDED

158 223–361

Gland/

Packing

Stack

ADDED

159 223–362

Gland/

Packing

Stack

ADDED

160 223–363

Gland/

Packing

Stack

Displ.

DELETED

146 183–751

M. Gland

Pump 

DELETED

147 108–976

V–Packing

220–449

DELETED

148 183–647

M. Gland

DELETED

149 183–753

F. Gland

DELETED

150 108–977

V–Packing

DELETED

151 183–648

F. Gland

DELETED

152 109–034

V–Packing

DELETED

153 109–035

V–Packing

DELETED

154 183–752

F. Gland

DELETED

155 109–036

V–Packing

DELETED

156 109–037

V–Packing

DELETED

157 185–372

Shim

ADDED

158 223–361

Gland/

Packing

Stack

ADDED

159 223–359

Gland/

Packing

Stack

ADDED

160 223–360

Gland/

Packing

Stack

SERVICE INFORMATION

Listed below by the assembly changed are ADDED

and DELETED parts.

Assembly

Ref

Changed

Status

No. Part No.

Name

NOTE:

 The Gland/Packing Stacks listed above are

also included in the Standard Repair Kits for these

pumps, Part Nos. 222–101 and 221–156. The individu-

al glands and packings are no longer available as sepa-

rate replacement parts. The gland/packing stacks are

shipped preassembled and should not be taken apart

during installation in the pump.

Optional packing stacks with Leather and UHMWPE

packings are also available. Refer to the parts list

pages for information.

HOW TO ORDER PARTS

1 To be sure you receive the correct replacement parts, kits or

accessories, always give all of the information requested in the

chart below.

2.  Check the parts list to identify the correct part number; do not use

the ref. no. when ordering.

3.  Order all parts from your nearest Graco distributor.

6 digit

Part Number

Qty

Part Description

Summary of Contents for Power-Flo Series





























Reviews: