![background image](http://html.mh-extra.com/html/graco/linelazer-v-hp-auto-series/linelazer-v-hp-auto-series_manual_2250950023.webp)
Application Methods
23
Angle Stall Layout: Layout Mode
Mark dots at end of each stall
LAYOUT MODE
1. Move the striper to one of the START points and line up the LazerGuide 1700 Start/Stop Laser with the START
reference dot and align the LazerGuide 2000 Laser with the Target Box.
2. Press the
GUN TRIGGER CONTROL
button to start laying dots. Move the striper toward the FINISH reference
dot while keeping the LazerGuide 2000 Laser lined up with the Target Box.
3. Press the
GUN TRIGGER CONTROL
button after the last FINISH reference dot is reached to stop laying
additional dots.
4. Move the Target Box to the second FINISH point and move the striper to the second START point. Repeat steps
2 and 3.