![background image](http://html.mh-extra.com/html/graco/linelazer-v-hp-auto-series/linelazer-v-hp-auto-series_manual_2250950006.webp)
6
Application Methods
Basic Stall Layout: Layout Mode
Establishing START and FINISH reference dots
NOTE:
For best results, always dot in the same direction.
NOTE:
Minimum engine RPM for placing dots is 2600.
LAYOUT MODE
1. Go to
LAYOUT MODE
on LiveLook display and select the depth of your stall as the
STALL SIZE
. In this case,
we are selecting 18 ft from the inside curb.
2. Set Gun 1 or 2 to active by pressing the 1 or 2 button on the display so that the red LED is lit.
3. Line the LazerGuide 1700 Start/Stop Laser up with the inside curb. Press the
GUN TRIGGER CONTROL
button
to place your curb START reference dot and then move the striper away from the curb until the second START
reference dot is placed - 18 ft from the inside curb in this example.
4. Press the
GUN TRIGGER CONTROL
button to stop placing additional reference dots.
5. Move the striper to the other end of the parking lot area and repeat steps 2 through 4 to the place the two FINISH
reference dots.
6. Set the LazerGuide 2000 Target Box at the FINISH reference dot facing the START reference dot.