LineLazer V LiveLook Display
3A3388A Operation
39
Layout Mode
Layout Mode is used to calculate and mark parking lot
stalls.
1.
Use
to select Layout Mode.
2.
Use gun activation buttons to select guns.
3.
Press and release gun trigger control and move
striper forward.
4.
Striper default is to place a dot every 9.0 ft (2.7m) to
mark the stall size. Stall size is adjustable.
5.
Dots are laid down until gun trigger control is
pressed and released again.
An indicator on the screen alternately flash when gun
trigger control is pressed to signal mode is active.
Ref. Description
1
Opens Stall Calculator Menu.
See
Stall Calculator
, page 40.
2
Opens Angle Calculator Menu.
See
Angle Calculator
, page 41.
3
Select
a “Favorite”, press for less than one sec-
ond.
Save
a “Favorite”, press and hold for more than
three seconds.
4
Job Data Logging, page 47.
5
Scroll between menu screens.
6
Adjust stall size/dot spacing.
7
Adjust dot size.
8
Auto Gun activation buttons.
9
Pressure.
1
9
2
3
4
5
6
7
8
ti27916a
ti27918a
ti27912a
ti27849a
