LineLazer V LiveLook Display
38
3A3388A Operation
Measure Mode (HP Auto Series)
Measure Mode replaces a tape measure to measure
distances when laying out an area to be striped.
1.
Use
to select Measure Mode.
2.
Press and release gun trigger control. Move striper
forwards or backwards. (Moving backwards is a
negative distance.)
3.
Press and release gun trigger control to end mea-
sured length. Up to six lengths are viewable.
The most recent measured length is also saved as the
measured distance in the Stall Calculator display. See
Stall Calculator
, page 40.
If an auto gun is activated, press and hold gun trigger
control at any time to apply a dot. If trigger is held while
striper is moving, a dot is marked every 12-inches
(30.5cm).
v
Ref. Description
1
Press to start measurement, Press to stop
measurement.
2
Hold to reset values to zero.
3
Job Data Logger, page 47.
4
Scroll between main menu screens
5
Last measurement taken
ti27914a
2
3
5
4
1
ti27842a
ti27915a
ti27842a
