![background image](http://html.mh-extra.com/html/graco/linelazer-es-1000/linelazer-es-1000_installation-repair-parts_2250938018.webp)
Setup/Startup
18
3A4603F Operation, Repair, Parts
10.
ES 1000:
Turn pressure control to prime. Allow fluid
to circulate for 15 seconds.
ES 2000:
Increase pressure 1/2 turn to start motor
and allow fluid to circulate for 15 seconds.
11. Turn pressure down, turn prime valve horizontal.
Disengage gun trigger lock.
12. Hold all guns against a grounded metal flushing pail.
Trigger guns and increase fluid pressure slowly until
pump runs smoothly to spray.
13. Inspect fittings for leaks. If leaks occur, turn sprayer
, page 16. Tighten leaky fittings. Repeat
, steps 1 - 13. If no leaks, continue to
trigger gun until system is thoroughly flushed.
Proceed to step 14.
14. Place siphon tube in paint pails.
15. Trigger all guns again into a flushing fluid pail until
paint appears. Assemble tips and guards.
16.
ES 2000:
Digital display is functional when unit is
turned on.
High-pressure spray is able to inject toxins into the
body and cause serious bodily injury. Do not stop
leaks with hand or rag.
ti27771a
ti30349a
ti27613a
ti27774a
Summary of Contents for LineLazer ES 1000
Page 38: ...ES2000 HP Auto Series 38 3A4603F Operation Repair Parts ES2000 HP Auto Series ...
Page 91: ...Wiring Diagram 230V ES 1000 3A4603F Operation Repair Parts 91 Wiring Diagram 230V ES 1000 ...
Page 109: ...Wiring Diagram 120V ES 2000 3A4603F Operation Repair Parts 109 Wiring Diagram 120V ES 2000 ...
Page 112: ...Wiring Diagram 230V ES 2000 112 3A4603F Operation Repair Parts Wiring Diagram 230V ES 2000 ...