LineLazer V LiveLook Display
3A3426EOperation
39
Measure Mode (HP Auto Series)
Measure Mode replaces a tape measure to measure
distances when laying out an area to be striped.
1. Use
to select Measure Mode.
2. Press and release auto gun trigger control. Move
striper forwards or backwards. (Moving backwards
is a negative distance.)
3. Press and release auto gun trigger control to end
measured length. Up to six lengths are viewable.
The most recent measured length is also saved as the
measured distance in the Stall Calculator display. See
If an auto gun is activated, press and hold gun trigger
control at any time to apply a dot. If trigger is held while
striper is moving, a dot is marked every 12-inches
(30.5cm).
Ref. Description
1
Press to start measurement, Press to stop
measurement.
2
Hold to reset values to zero.
3
Job Data Logger, page 48.
4
Scroll between main menu screens
5
Last measurement taken
ti27914a
2
3
5
4
1
ti27842a
ti27915a
ti27842a
Summary of Contents for High Production Series
Page 25: ...Cleanup 3A3426EOperation 25 Standard Series ...
Page 26: ...LineLazer V LiveLook Display 26 3A3426EOperation LineLazer V LiveLook Display Standard Series ...
Page 56: ...Wiring Diagram 200HS Standard Series 56 3A3426EOperation Wiring Diagram 200HS Standard Series ...
Page 58: ...Wiring Diagram 200DC Standard Series 58 3A3426EOperation Wiring Diagram 200DC Standard Series ...