![background image](http://html.mh-extra.com/html/graco/high-production-series/high-production-series_operation_2250922028.webp)
LineLazer V LiveLook Display
28
3A3426EOperation
3. Press to
select
Setup/Information.
4. Press for
Calibration.
Set TRAVEL DIST to 25 ft
(7.6m) or longer. Longer distances ensure better1
accuracy, depending on conditions.
\
5. Align part of the unit with 1 foot (30.5cm) on steel
tape.
6. Push to
start
calibration.
7. Move striper forward. Keep unit aligned with steel
tape.
8. Stop when chosen part of unit aligns with 26-ft (8m),
or distance entered, on steel tape (25-ft./ 7.6m
distance).
9. Push to
complete
calibration.
•
Calibration is not complete when the exclamation
symbol
is
displayed.
•
Calibration is finished when the check mark symbol
is displayed.
10. Calibration is now complete.
Go to
Measure Mode (Standard Series)
, page 30, and
verify accuracy by measuring the tape.
ti27827a
ti27830a
1
FT
2
FT
3
FT
4
FT
5
FT
6
F
ti27831a
ti27826a
26
FT
27
FT
28
FT
29
FT
30
FT
31
F
25
FT
ti27832a
ti28022a
Summary of Contents for High Production Series
Page 25: ...Cleanup 3A3426EOperation 25 Standard Series ...
Page 26: ...LineLazer V LiveLook Display 26 3A3426EOperation LineLazer V LiveLook Display Standard Series ...
Page 56: ...Wiring Diagram 200HS Standard Series 56 3A3426EOperation Wiring Diagram 200HS Standard Series ...
Page 58: ...Wiring Diagram 200DC Standard Series 58 3A3426EOperation Wiring Diagram 200DC Standard Series ...