![background image](http://html1.mh-extra.com/html/graco/hfrl/hfrl_setup-and-operation-manual_2251559086.webp)
Appendix D - ADM Error Codes
86
3A2175Z
CAA2 Comm. Error
Red Hose
Communication error
Alarm
Module missing power Check power supply connection
CAA3 Comm. Error
Red Inline
Module not programmed Program the module
CAA6 Comm. Error
Red Blanket
Module bad
Replace module
CAA7 Comm. Error
Red Chiller
CAB1 Comm. Error
Blue Inline
CAB4 Comm. Error
Blue Hose
CAB5 Comm. Error
Blue Blanket
CAB8 Comm. Error
Blue Chiller
CAC1 Comm. Error
Motor
CAC2 Comm. Error
MCM
CAC3 Comm. Error
Red Tank
CAC4 Comm. Error
Blue Tank
CAC5 Comm. Error
Mix Head
CAC6 Comm. Error
Mix Head 2
CAC7 Comm. Error
Ratio Monitor
CAC9
Comm. Error
Small
Dispense Kit
CACN Comm. Error
Gateway
CACP Comm. Error
DGM
CACR
Comm. Error
Remote
Pendant
CAD1 Comm. Error
Mixer
Voltex Mixer Module is Off line
(HFR Only)
Alarm
CAN cable to Voltex
FCM3 is disconnected.
FCM3 failure.
Reconnect, ensure cable. Verify proper LED
indications on Voltex FCM3.
CUCN
Gateway
Heartbeat
Error
Heartbeat Error
Alarm
PLC is not maintaining
heartbeat
Ensure PLC is triggering the heartbeat
Module missing power Check power supply connection
Module not programmed Program the module
Module Bad
Repalce module
D1A1 Setpoint Not
Reached
The set point was not reached
and the pump was shutdown Deviation
Material restriction too
high for requested flow Reduce flow request
D4A1 Setpoint
Exceeded
The maximum cycles per
minute of the pump has been
exceeded
Deviation Restriction for the pump
is not sufficient
Increase the restriction or lower the set point
D2A1 Setpoint Not
Reached
The set point was not reached Deviation
Pump cannot reach the
requested pressure
Increase restriction in the system
Pump cannot reach the
requested flow
Decrease restriction in the system
Error
Code Error Name Error Description
Error
Type
Cause
Solution
Summary of Contents for HFRL
Page 13: ...Warnings 3A2175Z 13...
Page 137: ...Accessories 3A2175Z 137...