Graco HFRL, Setup And Operation Manual

Page: 63 / 142

Appendix B - ADM Setup Screens Overview
3A2175Z 63
5. Enter the calculated value in the ∆ column. Sequences Screen
These screens allow the user to select a sequence of
shot numbers or recipe numbers previously defined in
the Shot screens. After a sequence is defined, the user
can dispense the sequence starting from the first posi -
tion containing a shot number, and ending with the last
position containing a non-zero number. The Sequence
screens will only allow the user to select a shot number
previously defined in the Shot screens. Shot numbers
containing blank data will not be available for selection
in a sequence. Blank positions (containing a 0) in
sequence will be skipped by the HFR sequence logic.
For example, sequence “Y” in the screen shown below
will dispense shot numbers 11, 12, 13, 14, 15, and end
with 16 if executed completely.
Dispense detail is shown as volume, time, or weight
depending on which Dispense Mode is selected. See
System Screen 1 on page 65 for Dispense Mode
options. See Home Screen, Sequence Mode on
page 79 for information on how to use predefined
sequences.
NOTE: 26 (A-Z) sequences with up to 20 positions each
are available across 52 pages.
To edit a sequence:
1. Press the Enter screen button
then use the
arrow keys to navigate to the desired value.
2. Type the new value then press the Enter button
to accept the new value.
Example 3: