Belt Replacement
10
3A5919A
Installation
1. Install new belt.
2. Use two wrenches to tighten motor mount
adjustment bolts on each side of scarifier base.
3. Tighten belt adjustment bolt according to
recommended tension below.
Belt Tension Recommendations:
4. Tighten jam nut through two sides of belt.
5. Replace belt shroud and tighten three nuts and four
screws.
ti15061a
ti15087a
ti15083a
3VX355 Belt
DC89
DC1013
DC1021
New
Belt
Tension (Lbf)
145 +/- 5
193 +/- 7
194 +/- 7
Frequency (Hz)
91 +/- 2
105 +/- 2
105 +/- 2
Used
Belt
Tension (Lbf)
125 +/- 5
167 +/- 7
167 +/- 7
Frequency (Hz)
85 +/- 2
98 +/- 2
98 +/- 2
ti15067a
ti15058a