Graco GrindLazer 25M992, Repair Manual

Page: 5 / 20

Component Identification
3A5919A 5
Component Identification
DC89 G and
DC1021 G Model
DC1013 G Models
Component Description
A Engine Throttle Lever Adjusts engine speed.
B Engine Power Switch Supplies power to Engine
C Engine Kill Button Clamps onto the operator and shuts engine off if cord is disconnected during
operation.
D Drum Adjustment Dial Sets depth of drum cut.
E Drum Engage Lever When lever is engaged, handle bars can be pushed down to raise the cutting
drum off of surface and locked into UP position. Once drum is locked in UP
position, GrindLazer can be moved around without drum touching surface.
F Front Wheel Lock Lever Front wheel is usually locked to guide GrindLazer in a straight line. When lever
is engaged, front wheel becomes unlocked and is allowed to turn freely.
G Rear Wheel Parking Brake Prevents rear wheel from moving.
H Drum Access Panel Removable plate that allows access to replace cutting drum.
K Depth Control Wheels Levels cutting drum.
M Vacuum Port Port to attach vacuum to reduce dust and debris during operation.
N Lift Points Reinforced points used for lifting GrindLazer during transportaton or repair.
P Ignition Switch Electric Start Engine (DC1021 G Model Only)
R Tachometer/Hour Meter Displays the RPMs of the engine while running and displays total hours of
engine run time.