Installation
8
3A6714C
Choose an Installation Location
•
Select a location that will support the weight of the
pump and lubricant, as well as all plumbing and
electrical connections.
•
Refer to the two mounting hole layouts provided in
the Mounting Pattern section of this manual, page
35.
•
Use designated mounting holes and provided con-
figurations only.
•
Use the two fasteners (included) to secure the pump
to the mounting surface.
Some installations may require an additional pump
bracket.
Mounting Bracket Kits
Direct Mount CSP Hose Kits
Direct CSP Mount Kits
AUTOMATIC SYSTEM ACTIVATION HAZARD
Unexpected activation of the system could result in
serious injury, including skin injection and amputa-
tion.
This device has an automatic timer that activates the
pump lubrication system when power is connected or
when exiting the programming function. Before you
install the lubrication pump or remove it from the sys-
tem, disconnect and isolate all power supplies and
relieve all pressure.
Part No
Description
26C826
Universal Bracket (fastener included)
26C825
Direct Mount CSP Bracket (fastener
included)
F
IG
. 4: 26C826
F
IG
. 5: 26C825
Part No
Description
26C956
1/4 NPT (Pressure Relief Outlet) to 1/8
NPT (CSP Inlet), includes hose (25 cm
length), fitting 17T781and 17T783
26C957
1/4 NPT (Pressure Relief Outlet) to 1/8
BSPT (CSP Inlet), includes hose (25 cm
length), fitting 17L546 and 17T783
Part No
Description
26C958
Kit, CSP Mount, NPT, includes 26C825
and 26C956
26C959
Kit, CSP Mount, BSPT, includes 26C825
and 26C957
