Setup
3A6714C
17
1.
Connect the fill hose to the Zerk Inlet Fill Fitting (E)
(F
2.
For higher viscosity fluids, start the pump, per the
controller instructions, to rotate the stirring paddle
during filling to prevent air pockets from forming in
the grease.
For models using an external controller, start the pump
operation following the controller instructions.
3.
Fill the reservoir with NLGI grease to the MAX line
(F
NOTE:
The venting tube (B) should not be used as an
overfill indicator (F
4.
Remove the fill hose.
Change Greases
Always use compatible grease when changing grease.
F
IG
. 17
E
F
IG
. 18
B
