308225
4
WARNING
INSTRUCTIONS
EQUIPMENT MISUSE HAZARD
Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.
D
This equipment is for professional use only.
D
Read all instruction manuals, tags, and labels before operating the equipment.
D
Use the equipment only for its intended purpose. If you are uncertain about usage, call your Graco
distributor.
D
Do not alter or modify this equipment. Use only genuine Graco parts and accessories.
D
Check equipment daily. Repair or replace worn or damaged parts immediately.
D
See the chart on page 6 for important pressure rating information. The maximum working pres-
sure of each model is also shown on the pump identification plate. Be sure that all dispensing
equipment and accessories are rated to withstand the maximum working pressure of your pump.
Do not exceed the maximum working pressure of the lowest rated system component.
D
Never operate the pump without the automatic pressure relief valves and drainage kits installed.
These valves relieve fluid pressure through a drain port at the bottom of the valve if the displace-
ment pump pressure exceeds the working pressure.
D
Do not lift pressurized equipment.
D
Use only Graco approved hoses. Do not remove hose spring guards, which help protect the hose
from rupture caused by kinks or bends near the couplings.
D
Route the hoses away from the traffic areas, sharp edges, moving parts, and hot surfaces. Do not
expose Graco hoses to temperatures above 180
_
F (82
_
C) or below –40
_
F (–40
_
C).
D
Do not use the hoses to pull the equipment.
D
Use fluids and solvents that are compatible with the equipment wetted parts. See the
Technical
Data
section of all the equipment manuals. Read the fluid and solvent manufacturer’s warnings.
D
Comply with all applicable local, state and national fire, electrical and other safety regulations.
Summary of Contents for Bulldog Hydra-Cat 231836
Page 5: ...308225 5 Notes head notes ...
Page 44: ...308225 44 Notes head notes ...
