Graco BULLDOG HYDRA-CAT 208958, Instructions-Parts List Manual

Page: 22 / 26

22 307132
Accessories
Wall Mounting Bracket 206221
For wall mounting the Bulldog pump
Universal Frame 207872
For stationary mounting the Bulldog pump
Wheel Kit 208362
For converting universal frame 207872 to portable
pump cart
Grounding Wire and Clamp 237569
25 ft (7. 6m) long, 12 ga.
Wrench 176881
For tightening throat packing nut
Air Line Lubricator 214849
250 psi (1.7 MPa, 17.5 bar)
Maximum Working Pressure
3/4 npt inlet and outlet
Air Line Filter
250 psi (1.7 MPa, 17.5 bar)
Maximum Working Pressure
106149 1/2 npt(f) inlet and outlet.
106150 3/4 npt(f) inlet and outlet
Mounting Bracket 178470
Has two mounting holes for Relief Valve Installation
Kits 209005 and 209006
4 in.
(101.6 mm)
3/16 in. (5 mm)
dia bolt circles 3 holes
6.9 in.
(175.3 mm)
6.9 in.
(175.3 mm)
Throat Seal Liquid
Non-evaporating solvent for wet-cup
206994 8 oz (0.2 liter)
206995 1 qt (0.9 liter)
206996 1 gal (3.8 liter)
Air Regulator 205712
400 psi (2.8 MPa, 28 bar)
Maximum Working Pressure
1/2 in. size
Pump Runaway Valve 224040
Shuts off air to pump automatically if it senses that the
pump is running too fast, a condition caused by a de-
pleted fluid supply. 3/4 npt(f) inlet and outlet.
Bleed-type Master Air Valve 107142
300 psi (2.1 MPa, 21 bar)
Maximum Working Pressure
Relieves air trapped in the air line between the pump
air inlet and the valve when closed. 1/2 npt(f x m).
Fluid Drain Valve 210658
5000 psi (35 MPa, 350 bar)
Maximum Working Pressure
3/8 npt(mbe); Vitron seals
Nitrogen Regulator Kit 210658
For controlling harmful moisture in plural component
fluid supply containers