![background image](http://html.mh-extra.com/html/graco/96g011/96g011_instructions-manual_2251642026.webp)
Pro Model Setup
26
332298J
Pro Model Setup
Control Panel Overview (F
. 24)
NOTE:
Programming instructions begin on page 27.
F
IG
. 24
ON
OFF
!
HH
MM
SS
##
MM : SS
HH : MM
DISPLAY
•
A blinking LED under HH, MM, SS or ##
indicates type of measurement unit you
are setting; i.e., HH is hours.
•
A blinking number on the display indi
-
cates the G3 is in SETUP MODE.
•
In RUN MODE displayed numbers count
up or down. See Time ON and Time
OFF.
ON TIME
•
LED lights when ON Time
sequence is running.
•
Display shows time as MM:SS
(minutes and seconds).
i.e., 08:30 is 8 minutes: 30 sec
-
onds.
•
Times lubrication cycle.
OFF TIME
•
LED lights when OFF Time sequence is
running.
•
Value is entered in HH:MM.
•
Displays in HH:MM (hours and minutes)
when > 1 hour.
•
Displays in MM:SS (minutes and second)
ALARM ICONS
LED next to icon lights when a
fault / warning event occurs
during a run cycle. See page 38
for a complete description of
these alarm scenarios.
LOCK ICON
•
LED next to icon lights
indicating PIN is required
to enter setup.
•
In SETUP MODE LED
lights when setting up the
PRELUBE
LED next to icon lights indicat
-
ing Prelube function is en
-
abled.
LEFT DIRECTION ARROW /
RESET
•
In SETUP MODE: moves cursor
in display one field to the left.
•
In RUN MODE: single press
clears warning.
•
In RUN MODE: pressing for
one second ends run cycle if
there are no warnings.
•
In ALARM MODE: pressing and
holding for 3 seconds clears
fault / warning and switches
cycle to OFF MODE.
RIGHT DIRECTION ARROW /
MANUAL RUN / ENTER:
•
In SETUP MODE: saves entry,
moves cursor in display one
field to the right or to the next
setup step.
•
In RUN MODE: starts a man
-
ual run cycle.
UP and DOWN ARROW
•
Hold both the UP and DOWN ARROW but
-
tons down together for 3 seconds to enter
SETUP MODE.
•
In SETUP MODE, increases or decreases
number values shown in display.