![background image](http://html1.mh-extra.com/html/graco/24f883/24f883_instructions-manual_2251060020.webp)
Operation
20
312668ZAC
Error Code
Cause
Solution
Err 1
Flow rate is higher than 5 gpm.
Adjust the flow rate so it is not higher
than 5 gpm.
Air was pumped through the line.
Purge air from the line.
Err 4
Flow has continued after it should
have shut off.
Check if unit is resting on the trigger
if an obstruction is pressing the trig
-
ger. The unit checks for flow every
second and repeats the error code
until the trigger is released and the
error code cleared.
Err 5
The unit has dispensed the shut off
default amount and has stopped
fluid flow.
Press the Manual/Reset button, and
dispense again. To change the shut
off default amount, see
page 15.
Err 6
A preset dispense amount of zero
was entered for the dispense or is
stored as the default, and a Preset
dispense was attempted.
Enter an amount that is not zero. See
Dispensing Fluid in Auto Mode,
page
17.