Basic Operation for Hopper Gun Setup
311776B
5
Basic Operation for Hopper Gun Setup
Hopper Installation
1. The Hose Plug must be securely fastened to bottom
of gun when using the Hopper. Gun Plug must be
removed from top of gun.
2. Align notched opening in base of hopper to raised
notch on hopper port of gun body.
3. Push hopper down, over hopper port as far as it will
go.
4. Fasten clamp.
5. Connect air hose to gun.
6. Install spray nozzle, page 7.
7. Fill hopper with texture mix.
8. Open air valve.
9. Turn compressor ON. Adjust air valve for desired
texture.
It is easier to remove plug if gun is triggered.
For overhead applications and high walls, position
the hopper on the gun with the material fill opening
facing toward the nozzle (front) of the gun. For all
other applications, material fill opening should face
the air valve (back) of the gun.
ti8537a
ti2644a
ti8534a
ti8535a
ti2476b
2. Align notched opening in base of hopper to raised
notch on hopper port of gun body.
2. Align notched opening in base of hopper to raised
6. Install spray nozzle, page 7.
It is easier to remove plug if gun is triggered.
For overhead applications and high walls, position
the material fill opening
7. Fill hopper with texture mix.
2. Align notched opening in base of hopper to raised
notch on hopper port of gun body.
2. Align notched opening in base of hopper to raised
notch on hopper port of gun body.
8. Open air valve.
7. Fill hopper with texture mix.
7. Fill hopper with texture mix.
