Cleanup
8
311776B
Cleanup
Once you have finished spraying, follow these steps to
clean your gun and hopper.
1. Shut off compressor.
2. Disconnect air line from gun.
3. Drain remaining material into a bucket until most of
the texture material is out of hopper.
4. Fill hopper with clean water. Remove nozzle from
gun and allow water to flow through and out of gun.
5. Flush until gun is clean.
6. Remove hopper from gun and finish cleaning all
components. A soft brush may be used to help
loosen any dried on material from surface.
7. Connect air line to gun.
8. Turn on compressor.
9. Open gun air valve, forcing air through tip to clear
out any remaining material.
10. Disconnect compressor.
To improve working condition for future use, after
cleaning, apply a few drops of light oil to:
• Air hose quick disconnect
• Material hose connections
• Flow adjustment on gun
ti8568a
ti8534a
Be sure to keep air passages in needle clean and
free of material.
ti8528a
gun and allow water to flow through and out of gun.
5. Flush until gun is clean.
6. Remove hopper from gun and finish cleaning all
components. A soft brush may be used to help
loosen any dried on material from surface.
3. Drain remaining material into a bucket until most of
10. Disconnect compressor.
To improve working condition for future use, after
Be sure to keep air passages in needle clean and
free of material.
• Flow adjustment on gun
To improve working condition for future use, after
cleaning, apply a few drops of light oil to:
• Air hose quick disconnect
• Material hose connections
• Flow adjustment on gun
To improve working condition for future use, after
cleaning, apply a few drops of light oil to:
• Air hose quick disconnect
• Material hose connections
• Flow adjustment on gun
gun and allow water to flow through and out of gun.
6. Remove hopper from gun and finish cleaning all
components. A soft brush may be used to help
gun and allow water to flow through and out of gun.
5. Flush until gun is clean.
6. Remove hopper from gun and finish cleaning all
components. A soft brush may be used to help
