Mixing Material
6
311776B
Mixing Material
Dry Mix - 40 lb (18 kg) bag.
1. Slowly add one 40 lb. (18 kg) bag of texture material
to 5-6 gallons (18.9-22.7 liters) of clean water as
instructed on the bag instructions.
2. Agitate to mix, using a half-inch, variable speed drill
with mixing paddle, to a smooth, lump-free consis-
tency.
3. Allow ceiling texture to set for at least 15 minutes.
Then remix prior to use.
Premix
1. Slowly add approximately 2 to 4 qts (1.9 to 3.8 liters)
of water to a 5 gallon (18.9 liter) bucket of premix.
2. Agitate to mix, using a half-inch, variable speed drill
with a mixing paddle, to a smooth, lump-free consis-
tency.
Correct material mixture is essential to achieve
the desired finish.
Mix the material in a separate container before
pouring it into hopper.
For best results do not use partial bags of
material.
ti2496a
ti2497#1
ti2493a
1. Slowly add one 40 lb. (18 kg) bag of texture material
to 5-6 gallons (18.9-22.7 liters) of clean water as
3. Allow ceiling texture to set for at least 15 minutes.
Then remix prior to use.
Premix
1. Slowly add approximately 2 to 4 qts (1.9 to 3.8 liters)
of water to a 5 gallon (18.9 liter) bucket of premix.
1. Slowly add approximately 2 to 4 qts (1.9 to 3.8 liters)
of water to a 5 gallon (18.9 liter) bucket of premix.
2. Agitate to mix, using a ha
with a mixing paddle, to a smooth, lump-free consis-
