Component Identification
4
311776B
Component Identification
D
C
B
M
A
K
G
E
F
F
H
J
N
P
ti8526a
Model 245924
Identifier
Component
Description
A
Air Valve
Adjusts air to material mix ratio.
B
Flow Adjustment Nut
Sets needle position.
C
Trigger
Engages material flow/shuts off material flow.
D
Trigger Lock
Holds trigger open to assist operator during long jobs.
E
Material Fill Opening
Where mixed material is loaded into hopper. For overhead applications and high walls, position hopper
on gun with material fill opening facing toward nozzle (J) (front) of gun. For all other applications, mate-
rial fill opening should face toward the air valve (A) (back) of gun.
F
Handles
Provided for operator comfort and relieve operator fatigue during long jobs.
G
Hopper
Holds material.
H
Gun Plug
Must be in place when material hose is used with texture pump system. To use hopper, remove plug and
install hopper as described on page 5.
J
Nozzle
Different sizes available for use with different applications, See Nozzle Selection chart, page 7. #2 pro-
vided with 253898.
K
Hose Plug
Must be installed when hopper is used. See Graco RTX manual for installation and operating instruc-
tions for this feature.
M
Air Fitting
Quick Disconnect used to attach air hose to gun.
N
Clamp
Secures hopper on gun.
P
Gun Plug Clip
Secures gun plug to gun. WARNING: Must be installed prior to pressurizing system with RTX material
feed system.
Adjusts air to material mix ratio.
B
Flow Adjustment Nut
Sets needle position.
Engages material flow/shuts off material flow.
Holds trigger open to assist operator during long jobs.
E
Material Fill Opening
Where mixed material is loaded into hopper. For overhead applications and high walls, position hopper
on gun with material fill opening facing toward nozzle (J) (front) of gun. For all other applications, mate-
rial fill opening should face toward the air valve (A) (back) of gun.
Description
Provided for operator comfort and relieve operator fatigue during long jobs.
rial fill opening should face toward the air valve (A) (back) of gun.
Provided for operator comfort and relieve operator fatigue during long jobs.
on gun with material fill opening facing toward nozzle (J) (front) of gun. For all other applications, mate-
on gun with material fill opening facing toward nozzle (J) (front) of gun. For all other applications, mate-
rial fill opening should face toward the air valve (A) (back) of gun.
E
Material Fill Opening
Where mixed material is loaded into hopper. For overhead applications and high walls, position hopper
on gun with material fill opening facing toward nozzle (J) (front) of gun. For all other applications, mate-
rial fill opening should face toward the air valve (A) (back) of gun.
Holds trigger open to assist operator during long jobs.
E
Material Fill Opening
Where mixed material is loaded into hopper. For overhead applications and high walls, position hopper
on gun with material fill opening facing toward nozzle (J) (front) of gun. For all other applications, mate-
Holds trigger open to assist operator during long jobs.
